All plumbing and electrical work will be done as per the drawing given by the Architect.
Architect drawings to be provided in stages to the contracting company during construction, which will be a base line for design, material and finishing specifications.
Any other specifications not exclusively mentioned here means it is additional cost
Lofts will be charged extra
Cut lintels over doors and windows will be provided
Rainwater sump, Percolation pit and site cleaning will be charged extra
Excavation will be charged extra when encountered with water/loose soil/stone
Extra Reinforcement will be charged additional unless advised in the drawings
Wire & Switches provide by second party.
Cp fitting provide by second party.
Outside filling charges extra.
Govt. Taxes Extra
Design
Site Layout Plan
2D/3D Layout
Common work
Steel – Fe- 500D (TATA or equivalent)8.MM/10MM/12MM
Depth of the foundation 5 structural designer’s recommendation
Red Bricks – First Class brick
Structure Foundation- As per the structural designer’s recommendation. (Isolated footings )
Eccentric footing will be structural designer’s recommendation
Cement – ACC, Ultratech or CCI equivalent. (PPC & OPC).
M7.5/M10/M15/M20 As per the structural designer’s recommendation.
( Specifications for Design of footings as per IS 456: 2000)
Aggregates – 20mm & 40mm (Ponta Sahib)
Sand/Dust for Brickwork.
M Sand For Plastering.
RCC Design Mix – As per the structural designer’s recommendation.
foundation filling 2.5FT
Dr.Fixit or Asian Paint Waterproofing.
Ceiling Height – 10 to 11 feet (Finished Floor level to Finished Floor level).
Slab thickness more than 5” will be charged extra
Using Cover Blocks & Ant termite.
Staircase
Front elevation
T angle- 2
Tank Stand
Kitchen
Slab work as Per Customer Requirement
CPVC/ PVC Pipe – Finolex and Paras or equivalent.
Bathroom
CPVC/ PVC Pipe – Finolex and Paras As Per Customer Requirement
Waterproofing – Asian Paint Waterproofing.
Door & Window
All Door Frame – Sal wood frame of 5 inch by 3 inch.
All Windows frame – Sal wood frame of 5 inch by 3 inch.
Flooring
PPC
Electricity
Pipe Fittings – Fan box Cancelled box, Pipes (Polycab / Zester Or Equivalent)
TV unit point . as Per Customer Requirement.
Power point, Ac Point, Wifi Point, freeze point, microwave point, chimney point, geazer point. Etc…. acc to customer requirement and discussion.
Architectural details and extra charges:
Tapered roof area will be charged at Rs 200/sqft (If any special design)
Depth of the foundation more than 5’ feet will be charged additional
Compound wall will be charged additional @ Rs 1000/Rft based on foundation depth/height
All plumbing and electrical work will be done as per the drawing given by the Architect.
Architect drawings to be provided in stages to the contracting company during construction, which will be a base line for design, material and finishing specifications.
Any other specifications not exclusively mentioned here means it is additional cost
Lofts will be charged extra
Cut lintels over doors and windows will be provided
Rainwater sump, Percolation pit and site cleaning will be charged extra
Excavation will be charged extra when encountered with water/loose soil/stone
Extra Reinforcement will be charged additional unless advised in the drawings
Wire & Switches provide by second party.
Cp fitting provide by second party.
Outside filling charges extra.
Govt. Taxes Extra
Design
Site Layout Plan
Structure drawing
2D/3D Layout
Common work
Steel – Fe- 5000D (Kedar , Tehri gold, or equivalent)8.MM/10MM/12MM
Depth of the foundation 5 structural designer’s recommendation
Red Bricks – First Class brick
Structure Foundation- As per the structural designer’s recommendation. (Isolated footings )
Eccentric footing will be structural designer’s recommendation
Cement – ACC, Ultratech or CCI equivalent. (PPC & OPC).
M7.5/M10/M15/M20 As per the structural designer’s recommendation.
( Specifications for Design of footings as per IS 456: 2000)
Aggregates – 20mm & 40mm (Ponta Sahib)
Sand/Dust for Brickwork.
M Sand For Plastering.
RCC Design Mix – As per the structural designer’s recommendation.
foundation filling 2.5FT
Dr.Fixit or Asian Paint Waterproofing.
Ceiling Height – 10 to 11 feet (Finished Floor level to Finished Floor level).
Slab thickness more than 5” will be charged extra
Using Cover Blocks & Ant termite.
Staircase
Front elevation
T angle- 2
Tank Stand
Kitchen
Slab work as Per Customer Requirement
CPVC/ PVC Pipe – Finolex and Paras or equivalent.
Bathroom
CPVC/ PVC Pipe – Finolex and Paras As Per Customer Requirement
Waterproofing – Asian Paint Waterproofing.
Door & Window
All Door Frame – Sal wood frame of 5 inch by 3 inch.
All Windows frame – Sal wood frame of 5 inch by 3 inch.
Flooring
PPC
Electricity
Pipe Fittings – Fan box Cancelled box, Pipes (Polycab / Zester Or Equivalent)
TV unit point . as Per Customer Requirement.
Power point, Ac Point, Wifi Point, freeze point, microwave point, chimney point, geazer point. Etc…. acc to customer requirement and discussion.
Architectural details and extra charges:
Tapered roof area will be charged at Rs 200/sqft (If any special design)
Compound wall will be charged additional @ Rs 1000/Rft based on foundation depth/height
All plumbing and electrical work will be done as per the drawing given by the Architect.
Architect drawings to be provided in stages to the contracting company during construction, which will be a base line for design, material and finishing specifications.
Any other specifications not exclusively mentioned here means it is additional cost
Lofts will be charged extra
Cut lintels over doors and windows will be provided
Rainwater sump, Percolation pit and site cleaning will be charged extra
Excavation will be charged extra when encountered with water/loose soil/stone
Extra Reinforcement will be charged additional unless advised in the drawings
